Minwax®
Antique Oil Finish is an oil-based protective finish that gives wood
a soft, hand-rubbed lustre. It is durable, easily maintained, and highly
resistant to staining. Minwax® Antique Oil Finish may be used over
finished and unfinished wood.
Directions
1.Sand
to obtain a smooth, uniform surface. Remove all dust with a cloth dampened
with mineral spirits.
2.Wipe or brush on a generous coat of Minwax® Antique Oil. Apply
in the direction of the grain.
3.After 5-10 minutes, buff evenly with a clean, lint-free cloth.
4.Wait 24 hours and apply a second coat. Two coats are recommended.
5.For additional gloss, third coat after 24 hours.
Clean-Up: Use mineral spirits or paint thinner following manufacturer’s
safety instructions
Coverage:
Approximately 62-75 square feet per pint.
Note: If
buffing is difficult, recoat surface immediately and buff. Not recommended
for floors.
